Electro-Voice MB300 | Array-kit (2 plates) (Black)
Estado do Produto: Novo
Horizontal array kit for side-by-side arraying of two Sb121 Sb121a Sb122PI Sx100+ or Sx300 (use a second Mb300 to array three systems; the Mb300 requires one Mb200 U-bracket kit per speaker system) black.
The Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts.
The Mb300 is used in conjunction with the Mb200 installation bracket to create a speaker array. The array can be constructed in either of two angular configurations:
Speakers side by side (50 angle) for a tight array
Speakers spread slightly (60 angle) for wider coverage
(Note that a full 360 array can only be accomplished with the 60 angle pattern.)
Suspension of the speaker array is made easy with the four 12.7-mm (0.5-in.) holes located on the Mb300. A cable, chain quick link, or other suitable hardware which is rated for overhead lifting (not supplied with this kit) can be used to connect to the array for flying.
• Four 12.7-mm (0.5-in.) diameter holes
Mb300 Mounting Holes:
• Four 8-mm (5/i6*in.) diameter holes
• 10-gauge cold-rolled steel
• Wrinkled powder coat
• 3.63 kg (8.0 lb)
Array kit for SystemTM 200 speakers
Creates arrays of two to six speakers when used with the Mb200 installation bracket
Two mounting angles: 50° and 60°
Provides a rigid frame for arraying speakers from one to two levels